You are here

Dr. Vivekanand S Gogi

 Assistant Professor Vivekananda S Gogi
Educational Qualification

M. Tech, Karnataka University, Dharwad

(PhD), VTU, Belgavi

Experience Teaching: 24 years
Area/s of Interest Operations Research, Total Quality Management
Email ID vivekanands@rvce.edu.in  

Project Guided: UG : 25, PG: 04

National Journal Publications: 01

International Journal Publications: 12

National Conference Publications: 04

International Conference Publications: 16

 

List of Publications:

National Journal Publications:

  1. Vivekanand S Gogi and K.S. Badarinarayana presented paper at the "National Conference on World Class Manufacturing Practices (WCMP-2007) on “Total Quality Management in Education" conducted by department of IP, Basaveshwar College of Engineering, Bagalkot from 2nd & 3rd April 2007

  2. Vivekanand S Gogi, Prachi Deshmukh, Sowmyas presented a paper on “Technology Forecasting Models for Decision Making” at Pratibimb – 2012 (Reflections of Emerging Technologies), conducted by Department of Industrial and Production Engineering, The National Institute of Engineering, Mysore during 5th May 2012.

  3. Kirthana B H, Roopini S, Shraddha R, Vivekanand S Gogi presented a paper on "Review On The Application Of Taguchi Methods For Optimization Of Parameters In Turning Operations " at ‘National Conference on Emerging Trends in Engineering Management’, NCETEM – 2014, organised by Department of Industrial Engineering and Management, J S S A T E, Bangalore, during 6th - 7th November 2014.

  4. Nitin Mule, Vivekanand S Gogi, Dr. N S Narahari , “Implementation of Effective Traceability Mechanism in Hydraulic Pump Manufacturing Firm - A Case Study”, in National Journal of Industrial Engineering Journal, Volume VIII, Issue No 8, page 19 - 23, Aug 2015.

International Journal Publications:

  1. Deepthi Galagali, Vivekanand S Gogi published a paper on “Design of B2B Marketing Strategy For The Meter Data Management System Software” in International Research Journal of Modernization in Engineering Technology and Science, Volume 3, Issue 6, page 3835 – 3840, e – ISSN: 2582-5208, June 2021. (Impact Factor 5.354)

  2. Mir Mohammed Junaid Basha, Sonali Tukaram Wani, Navya V.S, Vivekanand S Gogi published a paper on “Study of Inventory Management in Pharmaceuticals:A Review of COVID-19 Situation” at International Journal of Innovative Science and Research Technology, Volume 5, Issue 8, pp. 366 – 371, August 2020, ISSN: 2456-2165
  3. Anoop, Muhammad, Vivekanand S Gogi published a paper on “A brief Overview on Toyota Production System” in International Journal for Research in Applied Science & Engineering Technology,  Volume 8, Issue V, page 2505 - 2509, ISSN: 2321 - 9653, May2020. (Impact Factor 7.429)
  4. Anusha G, Jaivardhan Yadalam, Rakshan J Malli, Vivekanand S Gogi published a paper on “Implementation of Different Techniques for Productivity Improvement”, in International Research Journal of Modernization in Engineering Technology and Science, Volume 2, Issue 4, Page no 1327 - 1340, e - ISSN: 2582 - 5208,  April 2020. (Impact Factor 1.525)
  5.  Vivekanand S Gogi, "Flexible manufacturing systems scheduling: A systematic  review" Bonfring International journal of Industrial Engg.& Management science, volume 6, Issue 3, Pg No 61-62, scopus index 0.541.
  6.  Vivekanand S Gogi, "Reduction of Lead Time using Value Stream Mapping in Gear Manufacturing”, in International Journal of latest Technology in Engineering, Management & Applied Science, ISSN: 2278 - 2540, Volume 3, Issue 7, page 91 - 98, July 2014.
  7. Vivekanand S Gogi, Generation of Genetic Maps Using the Travelling Salesman Problem (TSP) Algorithm”, in International Journal of Scientific and Engineering Research, ISSN 2229-5518, Volume 5, Issue6, page 364 - 371, June 2014
  8.  Vivekanand S Gogi,“Efficiency Improvement of a Plant Layout” in International Journal of Innovative Research in Science, Engineering and Technology, ISSN: 2319-8753, Volume 3, Issue 4, page 11203 - 11209, April 2014.
  9.  Vivekanand S Gogi, "Process Traceability-Systematic Review” in International Journal of Innovative Research in Science, Engineering and Technology, ISSN: 2319-8753, Volume 3, Issue 4, page 11199 - 11202, April 2014.
  10. Vivekanand S Gogi, "Cluster Formation Using Kohonens Self-Organizing Map" in International Journal on Theoretical & Applied Research in Mechanical Engineering, ISSN 2319 – 3182, Volume 1, Number 1, pg 37 – 41, Oct 2012.
  11. Vivekanand S Gogi, "Reduction of Changeover Time for 320 T Fine Blanking Press" in International Journal of Engineering & Manufacturing Science. ISSN 2249 – 3115, Volume 1, Number 1, pg 81-85, Jan – June 2011.

National Conference Publications:

  1. Vivekanand S Gogi and K.S. Badarinarayana presented paper at the "Total Quality Management in Education" in National Conference on World Class Manufacturing Practices (WCMP-2007) on  on 2nd & 3rd April 2007 conducted by department of IP, Basaveshwar College of Engineering, Bagalkot. 
  2. Vivekanand S Gogi, Prachi Deshmukh, Sowmyas presented a paper on “Technology Forecasting Models for Decision Making” at Pratibimb – 2012 (Reflections of Emerging Technologies), conducted by Department of Industrial and Production Engineering, The National Institute of Engineering, Mysore during 5th May 2012.

  3. Kirthana B H, Roopini S, Shraddha R, Vivekanand S Gogi presented a paper on "Review On The Application Of Taguchi Methods For Optimization Of Parameters In Turning Operations " at ‘National Conference on Emerging Trends in Engineering Management’, NCETEM – 2014, organised by Department of Industrial Engineering and Management, J S S A T E, Bangalore, during 6th - 7th November 2014.

International Conference Publications:

  1. Vivekanand S Gogi, Dr. C K Nagendra Guptha presented a paper on “Study & Analysis of Impact of Clustering of Machines On Performance Of Automated Storage And Retrieval System” at 4th International Conference on Functional Materials, Manufacturing & Performances (ICFMMP 2023) organized by Lovely Professional University in association with AIP Conference Proceedings (SCOPUS Index: 0.26), from 25th to 26th August 2023.

  2. Jeeval Kumari, Itish Garg, Samadrito Mukherjee, Priya Raj, Vivekanand S. Gogi presented paper on “A Review on the Evolution of Demand Forecasting Methods” at World Academy of Science, Engineering & Technology, ICIEOR 2022 : International Conference on Industrial Engineering and Operations Research, San Francisco, United States, ISNI:0000000091950263, Volume 16, from November 03 – 04, 2022.

  3. Vivekanand S Gogi, Mahantesh M Math, Shruthi M N, Ravishankar V presented a paper on “Design & Optimization of A Platform For Workflows In Industries – A Case Study” at 8th International Conference on Business Analytics and Intelligence (ICBAI-2021) organized by Indian Institute of Science, Bengaluru from 20th to 22nd December 2021.

  4. Dr. Narahari N S, Vivekanand S Gogi presented a paper on “Mathematical Framework for The Development of A Strategic Decision Support System” at International Conference AORBI 2021, organized by Operational Society of India, Government Holkar (Model, Autonomous) Science College, Indore from 17th to 19th December 2021.

  5. Sriraksha Murali, Shwetha R, M Abdul Haq, Vivekanand S Gogi presented a paper on " Crew Pairing Optimization in Indian Scenario" at International Conference on Trends in Industrial & Value Engineering Business & Social Innovation, ICIVBS - 2018, organised by Department of Industrial Engineering and Management, Dayanda Sagar College of Engineering, Bengaluru during 2nd to 4th April 2018

  6. Samyukta R, Nishchitha M, Vivekanand S Gogi, Bhaskar M G presented a paper on "Bus Transportation using Face Recognition System " at International Conference on Trends in Industrial & Value Engineering Business & Social Innovation, ICIVBS - 2018, organised by Department of Industrial Engineering and Management, Dayanda Sagar College of Engineering, Bengaluru during 2nd to 4th April 2018

  7. Shreyash P. Prasad, Vivekanand S. Gogi, Sunil R. Yalamalle presented a paper on “Case Study in Queuing Model for ATM Facility”at 3rd International Conference on Industrial Engineering & 57th National Convention of Indian Institution of Industrial Engineering (ICIE-2015) , organised by Sardar Vallabhai National Institute of Technology, Surat on November 26 - 28, 2015.
  8. Lavanya S Hebale, Girija S Vivekanand S Gogi presented a paper on "Optimization of Cutting Parameters of CNC Turning – A review" at International Conference on Advanced Materials, Manufacturing, Management & Thermal Sciences [AMMMT 2013] organized by Department of Mechanical Engineering & Industrial Engineering and Management, Tumkur during 3rd – 4th May 2013.
  9. Manjista Dey, Latha N, Shruthi V Aebare, Vivekanand S Gogi presented a paper on "Travelling Salesman Problem using C – Programming" at International Conference on Advanced Materials, Manufacturing, Management & Thermal Sciences [AMMMT 2013] organized by Department of Mechanical Engineering & Industrial Engineering and Management, Tumkur during 3rd – 4th May 2013.
  10. Vivekanand S Gogi, Dr. K S Badarinaraya presented a paper on "Cluster Formation using Kohonen's Self Organizing Map" at International Conference on Mechanical and Industrial Engineering" conducted by Institute for Research and Development India, Bhubaneswar, Odisa at Goa on 28th August 2012, having ISBN: 987-93-81361-17-6, pg 21-25, 2012.
  11. Vivekanand S Gogi, Dr A V Suresh: "REDUCTION OF CHANGEOVER TIME FOR 320 T FINE BLANKING PRESS" Accepted for publication in INTERNATIONAL JOURNAL OF ENGINEERING AND MANUFACTURING SCIENCE (IJEMS) and published in the month of October 2011.
  12. Swathi Shetty, Swaraj Lahoty and Vivekanand Gogi presented a paper on "Redesigning of Layout using Systematic Layout Planning" at International Conference on "Operational Excellence for Global Competitiveness" (ICOEGC – 2011) organized by Department of Industrial Engineering and Management R. V. College of Engineering, Bangalore, in association with M/s ABCON Information Systems Pvt. Ltd., Bangalore during 3rd – 5th February 2011
  13. Vikram N B, Dr. A.V. Suresh and Vivekanand S Gogi presented a paper on "Software Reliability and Testing Strategies" at International conference on Advances in Industrial Engineering Application" department of Industrial Engineering, Anna University Chennai during 6 – 8 January 2010.
  14. Vivekanand S Gogi, Dr. A.V. Suresh and Vikram N B presented a paper on " Knowledge Management: An Emerging Discipline in Organization" at International conference on Advances in Industrial Engineering Application" department of Industrial Engineering, Anna University Chennai during 6 – 8 January 2010
  15. Vivekanand S Gogi, Dr. A.V. Suresh and Vikram N B presented a paper on” Knowledge Management: An Emerging Discipline in Organization" at International Conference on “Advances in Industrial Engineering Application" department of Industrial Engineering, Anna University Chennai during 6 – 8 January 2010.

  16. Vivekanand S Gogi and K.S. Badarinarayana presented paper at the "National Conference on World Class Manufacturing Practices (WCMP-2007) on “Total Quality Management in Education" conducted by department of IP, Basaveshwar College of Engineering, Bagalkot from 2nd & 3rd April 2007.

CITATION

  1. “Cluster Formation Using Kohonens Self-Organizing Map” International Journal Paper, Cited in 2014 International Conference on Logistics Operations Management, IEEE - GOL 2014, RABAT - MOROCCO, JUNE 05 - 07.

  2. “Flexible Manufacturing Systems Scheduling: A Systematic Review.” Bonfring International Journal of Industrial Engineering and Management Science 6 (3): 61–62, Cited in International Journal of Production Research (Taylor & Francis), “Modelling of flexible manufacturing system: a review”, Received 11 June 2017; accepted 26 September 2017.

  3. “Flexible Manufacturing Systems Scheduling: A Systematic Review.” Bonfring International Journal of Industrial Engineering and Management Science 6 (3): 61–62, Cited in Journal of Supply Chain Management, “Factors Analysis of ISCM Benchmarking Using DEMATEL Technique”, 8 (1), page 1-14, 2019.

  4. Efficiency Improvement of a Plant Layout” International Journal of Innovative Research in Science, Engineering and Technology, cited in International Journal of Productivity and Quality Management (Inderscience Online), “A case study on productivity improvement in a display cases manufacturing industry”, 10th Oct 2020.

  5. “Flexible Manufacturing Systems Scheduling: A Systematic Review.” Bonfring International Journal of Industrial Engineering and Management Science 6 (3): 61–62, Cited in International Journal of Engineering Applied Sciences and Technology, 2022 Vol. 6, Issue 10, ISSN No. 2455-2143, Pages 111-120, “A Method For Transformation Of EBOM To MBOM With Multi-Cad Environment In Automotive BIW Manufacturing”, Published Online February 2022.

Workshop / Seminar Conference Attended

  1. Attended a Six Day Hands on Faculty Training Program on “Sensing, Automation, IoT and Robotics” organized by the Departments of ME/EC/EE of RV College of Engineering in collaboration with SST Technologies, Bengaluru held during 21st Feb to 26th Feb 2022.

  2. Attended a online one week Faculty Development Program on “Electric Mobility as a Future” organized by Dr. D.Y.Patil Institute of Engineering, Management and Research Akurdi, Pune in association with SAE India Western Section, from 25th October to 29th October 2021.

  3. Attended a online seminar on “Qualitative & Quantitative Metrics in RAAF of NAAC” sponsored by NAAC organized by Rajalakshmi Engineering College, Thandalam, Chennai 602 105, on 17th September 2021.

  4. Attended a online one week Faculty Development Program on “Universal Human Values Refresher 1 (Part 1)” organized by All India Council for Technical Education(AICTE) from 30 August, 2021 to 3 September, 2021.

  5. Attended a two day work shop on “Examination Reforms” jointly conducted by All India Council for Technical Education (AICTE) and Chitkara University, Chandigarh from 8th to 10th July 2021.

  6. Attended a six day AICTE – RGPV Joint Teachers Training Program on “An Interdisciplinary Approach to Data Analysis and Visualization: Tools and Techniques”, conducted by Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal, M.P. from 5th July to 10th July 2021.

  7. Attended a five day Faculty Development Program on “Universal Human Values” conducted by AICTE, New Delhi from 17th May to 21st May 2021.

  8. Attended a One Week Continuing Education Program on “Big Data Analytics”, organized by R V Institute of Management, Bangalore, from 5th to 10th October 2020.

  9. Attended a A Two Week Online Certificate Program with Intensive Hands – on Training on “R Programming”, organised by Faculty of Humanities and Science, Adayalampattu Phase - II campus, Chennai from 14th to 25th September 2020.

Invited Talk:

  1. Given a talk in Online workshop on "Applications of Project Management Tools", conducted by MCA – RVCE for IIIrd & Vth Sem students on 17th December 2021.

  2. Given a talk in online workshop on “Department Level Professional Societies & Interactions” as a part of first year orientation program conducted by RVCE, IEM on 14th December 2021.

  3. Given a talk on Facilities Planning & Design at RV College of Engineering for Non-Teaching Staff on 12th June 2021.

  4. Given a webinar talk on “Design Thinking Works” carried out by 4th sem IEM students in Webinar on Desin Thinking, hosted by RVCE on 30th July 2020.

  5. Given a talk on “Facilities Planning” at Foreman Training Institute, Bengaluru on 17th Oct 2014

  6. Given a talk on Facilities Planning & Design at RV College of Engineering for Non-Teaching Staff on 12th June 2021.

  7. Given a talk in online workshop on “Department Level Professional Societies & Interactions” as a part of first year orientation program conducted by RVCE, IEM on 14th December 2021.

  8. Given a talk in Online workshop on "Applications of Project Management Tools", conducted by MCA – RVCE for IIIrd & Vth Sem students on 17th December 2021.

  9. Given a talk on “Heuristic Approaches to Plant Layout”, for VI sem IEM Student on 12th July 2022.

  10. Given a talk on “Advanced Manufacturing Technologies”, for V Sem students and faculty of Motichand Lengade Bharatesh Polytechnic, Belagavi on 20th Dec 2022.

  11. Given a talk on “Overview of Advanced Manufacturing Methods”, in Faculty Development Program, organized by Motichand Lengade Bharatesh Polytechnic in association with Centre for Continuing Technical Education in Karnataka, Belagavi on 17th April 2023.

FACULTY DEVELOPMENT / TRAINING PROGRAMS ORGANIZED/ COORDINATED

 

Details
Institution
Duration
Position

2006

Two week Faculty Development Program on Business Process Modeling

AICTE Sponsored program by Dept. of IEM, RVCE

17th - 29th July’2006

Organizing Committee Member

Synergy 2006 – A techno Management Festival

Dept. of IEM, RVCE

6th - 7th Oct’ 2006

Organizing Committee Member

2007

National workshop on Competency Mapping for Effective Performance.

Dept of IEM, RVCE

12th May’2007

Organizing Committee Member

Three day program on Human Resource Development

Conducted by IHA Sponsored by AICTE at Dept. of IEM, RVCE

18th – 20th Dec 2007

Organizing Committee Member

2008

8th Mile, Techno-Cultural Extravaganza

RVCE

28th – 30th March 2008

Event Coordinator

Three days faculty development program on Management and Entrepreneurship

RVCE, Bangalore

29th – 31st July 2008

Organizing Committee Member

2009

Two day National Conference on Rapid prototyping and manufacturing

RVCE, Bangalore

12th - 13th May 2009

Organizing Committee Member

2010

One day workshop on E-waste Management

RVCE, Bangalore

25th March 2010

Organizing Committee Member

2011

Three day International Conference on Operational Excellence for Global Competitiveness

RVCE, Bangalore

3rd – 5th

Feb 2011

Sponsorship & Transportation Committee Member

One day Seminar on Recent Trends in Software Quality and Reliability

Dept. of IEM, & ED Cell,RVCE

13th April 2011

Organizing Committee Member

Two day Workshop on Intellectual Property Rights

Dept of IEM, RVCE

18th – 19th Aug 2011

Organizing Committee Member

2012

Three day workshop on Management Practices for Business Excellence and Sustainability

Dept of IEM, RVCE

8th – 10th Aug 2012

Organizing Committee Member & a coordinator for 2nd day.

2013

Teacher’s day

ISTE – RVCE Chapter

28th Sep 2013

Executive Committee Member

Five day workshop on Applications of Operations Research in Transport & Logistics Sector

TEQIP – II Initiative &

IEM, MCA & Mathematics Dept.

26th – 30th Nov 2013

 

Coordinator

2014

Invited Talk

Foreman Training Institute

17th Oct 2014

Invited Talk

Five day faculty development program on Emerging paradigm in Project Management

TEQIP – II Initiative &

IEM

4th - 8th Aug 2014

Coordinator

Teacher’s day

ISTE – RVCE Chapter

27th Sept 2014

Executive Committee Member

7th International Congress of Environmental Research

Journal of Environmental Research And Development (JERAD), India and R. V. College of Engineering, Bangalore

26th - 28th Dec 2014

Session Co-chaired

2015

Teacher’s day

ISTE – RVCE Chapter

4th Nov 2015

Executive Committee Member

2016

One Week Short Term Course on Research Methodology

State Project Facilitation Unit (SPFU), Dept of ISE, CSE and IEM

6th - 11th June 2016

Organizing Committee Member

Inaugural Function

RVCE

31st July 2016

Infrastructure committee Member

2017

Three day workshop on Optimization using MATLAB

Dept of IEM, Maths with MATHLAB

16th - 18th Feb 2017

Coordinator

Three day workshop on Optimization In Design & Engineering

Dept of IEM with IIT Bombay

9th - 11th March 2017

Coordinator

Inaugural Function

RVCE

31st July 2017

Infrastructure committee Member

2018

Project Presentation

IEM, RVCE

24th April 2018

Expert Panel Member

2020

Invited Talk

RVCE

30th July 2020

Design Thinking Works

 

 

 

 

2021

Invited Talk

RVCE - Non-Teaching Staff

12th June 2021

Facilities Planning & Design for

Invited Talk

First year orientation program

14th Dec 2021

Department Level Professional Societies & Interactions

Invited Talk

Online workshop for MCA students, RVCE

17th Dec 2021

Applications of Project Management Tools

2022

Invited Talk

RVCE IEM Students

12th July 2022

Heuristic Approaches to Plant Layout

2023

Invited Talk

Motichand Lengade Bharatesh Polytechnic in association with Centre for Continuing Technical Education in Karnataka

17th April 2023

Overview of Advanced Manufacturing Methods

 

RECOGNITION

 

  1. Recipient of “Testimonial of Appreciation” given by National Level techno – Cultural Festival 8th Mile, RVCE on 28th to 30th March 2008

  2. Certificate of Appreciation given by R V College of Engineering for publishing Technical Paper at National Conferences.

ASSOCIATION WITH PROFESSIONAL BODIES

Nature
Organization
Membership Number

LIFE MEMBER

Indian Society for Technical Education (ISTE)

LM 397

SENIOR MEMBER

Indian Institution of Industrial Engineering (IIIE)

SM 9951(11)