Date of Joining RVCE

05-09-2009

Project Guided:

Number of UG projects guided:20

Number of PG projects guided: 28

Publications:

National Conference: 16

International Journals: 23

International Conferences: 04

List of International Journals publications:

1. Nagamadhu M., S. B. Kivade, P. Jeyaraj, G. C. Mohan Kumar, Shivaraj B. W. &
   K. N. Bharath,"Study on tearing strength of woven sisal fabrics for tents and polymer composite applications. JOURNAL OF NATURAL FIBERS 2023, VOL. 20, NO. 1, 2165590.

2. Darshan S, Shivaraj BW , Bharatish A, Krishna M,Narasimha Murthy HN,"Effect of Serrated Endmill Geometry on Machining Responses of Al 2024 Thin-Walled Components", Journal of the Chinese Society of Mechanical Engineers, Vol.43, No.5, pp.549~558(2022)

3. V Kumar, S Darshan, BW Shivaraj, M Krishna,"Modeling and Simulation of TiO2 /Se Sensor for Detection of CO Gas Using Comsol Multiphysics", ECS Transactions, 107 (1) 5867-5877 (2022).

4. Md Saad Patel, Sudeep M, Abdul Rahman Faisal, Abhishek B,Shivaraj BW, Vishal Chaudhary, Manjunatha C, "Functionalized Iron Oxide Nanostructures: Recent Advances in the Synthesis, Characterization, and Electrochemical Biosensor Applications", ECS Transactions, 107 (1) 15477-15486 (2022)

    
5. Synthesis of lanthanum titanate (La₂Ti₂O₇) for high temperature sensor applications, Naveed Iqbal Ansari, P Sivagnanapalani, V Sureshkumar, BW Shivaraj, PK Panda,Journal of Materials Science: Materials in Electronics,32 (23), 2021, 27422-27428.
6. "Development of non-stoichiometric hybrid Co₃S₄/Co_0.85Se nanocomposites for an evaluation of synergistic effect on the OER performance". Bruno G Pollet C Manjunatha, S Lakshmikant, L Shreenivasa, N Srinivasa, S Ashoka, BW Shivraj, Manickam Selvaraj, Ujwal Shreenag Meda, G Satheesh Babu, Surfaces and Interfaces, 25,2021,101161.

7. SA Ansari, C Manjunatha, N Parveen, BW Shivaraj, RH Krishna Mechanistic insights into defect chemistry and tailored photoluminescence and photocatalytic properties of aliovalent cation substituted Zn_0.94M_0.06−xLi_xO (M: Fe³⁺, Al³⁺, Cr³⁺) nanoparticles,Dalton Transactions 50 (41), (2021)14891-14907.

8. C. Manjunatha , Abhishek, B. W. Shivaraj · S. Ashoka,M. Shashank ,G. Nagaraju
   Engineering the M x Zn1−x O (M = Al3+, Fe3+, Cr3+) nanoparticles for visible light-assistedcatalytic mineralization of methylene blue dye using Taguchi design, Chemical Papers (2020) 74:2719–2731.

9. Vijayakumar , B.W. Shivaraj , C. Manjunatha , B. Abhishek , G. Nagaraju , P.K. Panda
   Hydrothermal synthesis of ZnO nanotubes for CO gas sensing, Sensors International 1 (2020) 100018.

10. C Manjunatha, V Chirag, B W Shivaraj, N Srinivasa, S Ashoka, "One pot green synthesis of novel rGO@ ZnO nanocomposite and fabrication of electrochemical sensor for ascorbic acid using screen-printed electrode", Journal of Nanostructures,10,3,(2020) 531-539.

11. G K Nagendra, B W Shivaraj, C Manjunatha, S A Ayeesha Siddiqua, V Suchithra Study of structural features and antibacterial property of ZnO/CuO nanocomposites derived from solution combustion synthesis, IOP Conf. Series: Materials Science and Engineering 577 (2019) 012111, 1-10.

12. M. Jena , C. Manjunatha , B.W. Shivaraj , G. Nagaraju , S. Ashoka ,M.P. ShamAan “Optimization of parameters for maximizing photocatalytic behaviour of Zn1-xFexO nanoparticles for methyl orange degradation using Taguchi and Grey relational analysis Approach”,  Materials Today Chemistry,12(2019), pp.187-199.

13. Sumit Hemant Pitale , Shivaraj B W , Ravi Kumar Dhulipalla , “Sensitivity of Dynamics of a Locomotive Suspension to Axle Loading”, International Journal of Engineering Research & Technology, 8, (2019), pp.1033-1038.

14.  Sachin S B, Shivaraj B W, H N Narasimha Murthy, M Krishna ,Manjush G, Mohd Idrisa, Pundaleek Anawala ,Vitthal SA “Synthesis and Characterization of Copper Doped Zinc Oxide Thin Films for CO Gas Sensing”, Elsevier Publications Materials Today: Proceedings 5 (2018) pp. 20904–20911.

15. Apoorva, V, Hemalatha, J.N, Achyutha W.M, Shivaraj, B.W. “Steps involved while introducing a new product into a healthcare organization”. Proceedings of the International Conference on Computing Methodologies and Communication,ICCMC (2018), pp. 180-184.

16. Rajkumar T. Shivaraj B.W, H .N. Narasimha Murthy, M. Krishna, T K Subramanya “Effect of deposition time on structural, electrical and optical properties of Aluminium doped ZnO thin films by RF magnetron sputtering”Elsevier Publications, Materials Today: Proceedings 2018, 5(1), pp.2710-2715.

17. Vivek.A , Shivaraj B.W, Akshay Chavan, H N Narashima Murthy, M Krishna, B S Satyanarayana "Optimization of Spin Coating Parameters for Preparation of ZnO Thin Films by Grey-Taguchi Method". International Journal of Nanomanufacturing,Inderscience Publishers, Vol. 13, No. 3, (2017), 197-209.
18. B.W. Shivaraj, H. N. Narasimha Murthy, M. Krishna, B.S.Satyanarayana, B. M. Nagabhushana, Influence of deposition parameters on structural, morphologicaland optical properties of ZnO films using Robust Design Approach, International journal for material Engineering Innovation, Inderscience Publishers- Vol. 6, 2/3, (2015), pp .143-156
19.  B W Shivaraj, H .N. Narasimha Murthy , M. Krishna , B.S.Satyanarayana, “Effect of Annealing Temperature on Structural and Optical properties of Dip and Spin coated ZnO Thin Films”, Procedia in Materials Science, Elsevier – Procedia Materials Science  (2015), 10, pp. 292-300.
20. Shivaraj B W , Akshay Chavan, Vivek.A, H .N. Narasimha Murthy , M. Krishna ,B.S.Satyanarayana “Parametric Study of sol gel technique for fabricating ZnO Thin Films” Elsevier Procedia Materials Science,(2015) pp. 270-278.

21. Somashekar Somashekhar.K.H, Shivaraj B.W, “Synthesis and Characterization of Ag doped ZnO Thin Films”, International Research Journal of Engineering and Technology, (2015), pp 1586-1589.

22. B W Shivaraj, H. N. Narasimha Murthy, M Krishna, S C Sharma, “Investigation of Influence of Spin Coating Parameters on t he Morphology of ZnO Thin Films by Taguchi Method ”, International Journal of Thin Films Science and Technology , 2,
    (2013), pp.143-154.

23. Chithajalu Kiran Sagar, B W Shivaraj, HN Narasimha Murthy, “ Design,development and analysis of press tool for hook hood lock auxiliary catch ”Springer, ICORD, (2013) pp 1063-1075.

List of International Conference publications:

1. Sushanth D Shandilya, M Krishna,T K Subramanya, Mohd Hammed Devadi, Sagar Kullolli, Anarghya Murthy ,B W Shivaraj , B S Sathyanarayana., “Optimization of electrical and morphological properties of Cu thin films deposited by DC magnetron sputtering using Taguchi method” ILAFM-2014 organized at RVCE, Bengaluru, 2014.
2. Mohammed Abdul Hameed Devadi, Praveen Bagali, M. Krishna, Nataraj J R, Shivaraj Wali, Sushanth Shandilya, Anarghya Murthy, Manjunath Cheelure, B S Sathyanarayana, “Investigation on Effect of Annealing Temperature on Structural and Optical Properties of TiO2 Thin Film” ILAFM-2014 organized at RVCE, Bengaluru, 2014.
3. Akshay Chavan, Shivaraj B.W, Vivek.A, H N Narashima Murthy, M Krishna, B S Satyanarayana , “Effect of Annealing Temperature on ZnO films by Taguchi design of experiment, Bangalore Nano, 2013.
4. Shivaraj B W, H N Narasimha Murthy, M Krishna, B S Satyanarayana, Optimization of spin coating Parameters on the Morphology of ZnO Thin Films, CSIR-NIIST, Nano India 2013, Trivandradum, 2013.

List of National Conference publications:

1. Koti Naveen kumar, Jinka Ranganyakulu, P.V. Srihari, B.W. Shivraj, Subhash R Patil “Optimization of process parameters in micro machining of borosilicate glass  using electrochemical discharge machining process” presented in National Conference on “Recent Advancements in Mechanical Engineering and Allied Fields - RAMEAF-2016,organized on 23-24, September 2016 ,SIR MVIT,Bangalore.

2.  Rajkumar T. Shivaraj B.W, H .N. Narasimha Murthy, M. Krishna, T K  Subramanya“Optimization of deposition time on the structural, electrical and optical properties of AZO thin films by RmagnF etron sputtering” Think Nano orgainised by CNSCE from March 25-2016 at IISc, Bangalore.

3. N.G. Pavan Kumar reddy, Shivaraj B. W, H. N. Narasimha Murthy., “Parametric study of AZO thin films for Carbon monoxide Gas sensing”, Advances in Research  and Development and Dissemination of Interdisciplinary Developments for sustainability, R.V. College of Engineering, Bengaluru, 2015.

4. Manjunath, Shivaraj B. W, H. N. Narasimha Murthy., “Effect of process parameters on CZO thin films for Carbon monoxide Gas sensing”, Advances in Research and Development and Dissemination of Interdisciplinary Developments
   for sustainability, R.V. College of Engineering, Bengaluru, 2015.

5. Sushanth D Shandilya, M Krishna,T K Subramanya, Mohammed Abdul HammedDevadi, Sagar Kullolli, Anarghya Murthy ,B W Shivaraj , B S Sathyanarayana.,“Optimization of electrical and morphological properties of Cu thin films deposited by DC magnetron sputtering using Taguchi method” ILAFM-2014 organized at RVCE, Bengaluru, November 2014.

6. Mohammed Abdul Hameed Devadi, Praveen Bagali1, M. Krishna, Nataraj J R, Shivaraj B W, Sushanth Shandilya, Anarghya Murthy, Manjunath Cheelure, B S Sathyanarayana., “Investigation on Effect of Annealing Temperature on Structural and Optical Properties of TiO2 Thin Film”, ILAFM-2014 organized at RVCE, Bengaluru, November 2014.

7. Mahammed Quyam, Shivaraj B.W, H.N. Narasimha Murthy. “Synthesis and characterization of Cu doped Zinc Oxide thin films”. Presented in conference on Advanced in Design, Manufacturing, and management (ADMM-14), held at
   R.V.College of engineering, Bangalore, 2014.

8. Sharath B Harikanta, Shivaraj B W, H N Narasimha Murthy, M Krishna, B S Satyanarayana, Synthesis and Charaterization of Aluminum doped ZnO films,Advances in Design, Manufacturing and Management (ADMM-14) RVCE Bengaluru, 2014.

9. Somashekar S.H, Shivaraj B W, H N Narasimha Murthy, M Krishna, B S Satyanarayana, Synthesis and Charterization of Silver doped ZnO films, Advances in Design, Manufacturing and Management (ADMM-14), RVCE, Bengaluru, 2014.

10. Vivek.A , Shivaraj B.W, Akshay Chavan, H N Narashima Murthy, M Krishna, B S Satyanarayana “Parametric Study of Spin Coating For Preparing ZnO Films by Taguchi OA Technique” held at Bangalore Nano, 4-6 December 2013.

11.  Akshay Chavan, Shivaraj B.W, Vivek.A, H N Narashima Murthy, M Krishna, B S Satyanarayana “Effect of Annealing Temperature on ZnO films by Taguchi design of experiment” held at Bangalore Nano, 4-6 December 2013.

12. Shivaraj B W , H N Narasimha Murthy, M Krishna, B S Satyanarayana “Optimization of spin coating Parameters on the Morphology of ZnO Thin Films” held during at CSIR-NIIST, Nano India 2013, Trivandradrum, 19 -20 February.

13.  Chitajalu Kiran, Shivaraj B W, H N Narasimha Murthy “Design, Development And Analysis of Press Tool For Hook Hood Lock Auxiliary Catch” at International Conference on Research into design, 2013 at IITM, Chennai.

14. Shivaraj B W, H N Narasimhamurthy and N N Rao “EPEI: Lean implementation tool for manufacturing excellence in an automotive pump industry “at International conference in operational excellence for global competitiveness, 2011, R.V.C.E.,Bangalore.

15.  Shivaraj B W, H N Narasimhamurthy and N N Rao “Setup time reduction in milling machine” at International conference on advanced materials, manufacturing,management and Thermal sciences 2010, SIT, Tumkur.

16.  L J Kirthan, Ramakrishna Hegde, Pradeep kumar AS, Shivaraj B W, Pravin,Determination of Stress Intensity Factor for Mode I loading using the commercial FE software ANSYS in Tool steel (AISI A2) plates at National Conference on Recent Trends in Design and Manufacturing for Sustainability 2010 , Coimbatore

Membership of professional societies:

Indian Society for technical Eduaction- Life Member

Internationational Association of Engineers- Life Member

Funded Projects:

“Development of Zinc Oxide Nanotubes based Sensors for Air Pollution
Monitoring” under VGST, GoK grants received Rs.5 Lakh in 2018-2022.

Microwave Assisted Sol-Gel Synthesis And Characterization Of Metal
Oxide Thin Films” under AICTE, grants received Rs.11 Lakhs in 2017-2020.

Multi gas detector and Early Warning System under CoE (TEQIP
1.2.1) grants received Rs 50,000/- in 2017.

Development of Titanium based metal oxide films for gas sensor
applications” under CoE (TEQIP 1.2.1) grants received Rs 80,000/-in
2013.

Achievements/Awards/Recognitions:

Young Researcher Award  From RVCE-ISTE 2019

Gold medal from VTU for M.Tech in Product design and Manufacturing.