You are here

Dr. Shanmukha Nagaraj

                                                                                                                                                                                      [Go Back]

Dean Student Affairs, Professor
Educational Qualification Ph.D
Experience Teaching: 23 years
Industry: 01 year
R&D: 12 years
Area of Interest Composite Materials; Design of machine elements

Date of Joining RVCE

15-05-1999

Email ID

dean.studentaffairs@rvce.edu.in

shanmukhan@rvce.edu.in

Project Guided:

Number of UG projects guided: 20

Number of PG projects guided: 14

 

Publications:

National Journals: Nil

National Conference: 05

International Journals: 05

International Conferences: 10

Funded Research Projects

#

Project title

Sponsoring organization

Amount sanctioned

Status

1.

Cold expansion process evaluation for life limited critical aero-engine components

[Principal Investigator]

AICTE

[Nationally Coordinated Project]

Duration: 3 years

25,00,000

Completed

2.

Design and development of novel method of composite preparation.

[Principal Investigator]

UGC

Duration: 1 years

90,000

Completed

3.

Skill development and self employment training programme – testing & analyzing of exhaust emission from vehicles

[Principal Investigator]

Department of Science & Technology

 

Duration:01 year

3,53,400

Completed

4.

Experimental & analytical studies of residual stress fields& fatigue crack growth of pre-stressed fastener holes

[Principal Investigator]

Directorate of Extramural Research & Intellectual Property Rights [DRDO]

Duration:02 years

14,16,400

Completed

5.

Development of bio fiber reinforced sandwich structures

[co- investigator]

Environmental Research Programme (ERP),

New Delhi

Duration: 02 years

9,86,700

Completed

6.

Study on design & development of high strength ultra fine-grained alloys through equal channel angular Extrusion (ECAE)

[Principal Investigator]

Ministry of Defence

Naval Research Board

Duration: 02 years

29,76,800

Completed

CONSULTANCY PROJECTS

#

Project Title

Name of the Industry & Address

Amount (Rs)

Status

  1.  

Application of Nanotechnology in Bearings

SKF Technologies (India)Private Limited

Bommasandra Industrial Area, Bangalore - 99

Appreciation Certificate

Completed

  1.  

Characterization of Grinding Sludge and use as Secondary raw materials

Year: 2016

SKF Technologies (India)Private Limited

Bommasandra Industrial Area, Bangalore - 99

Appreciation Certificate

Completed

  1.  

Design and Development of an Automated traverse winder with vision system and interleave paper for a stamping press.

Project under CSR Scheme

 

TE Connectivity India Pvt. Ltd., No.22B, TE Part, Doddenakundi 2nd Phase,

Industrial Area, Whitefield Road, Bangalore -48

Duration: 1 Year From

Jan 1, to Dec 31, 2016

20,00,000.00

Completed

  1.  

Thermal Energy auditing of producer gas and kiln units of VRPL

Viswakarma Refractories Private limited

Kolar Industrial Area, Kolar

6,00,300.00

Completed

  1.  

Electrical Energy Auditing and management at BCFL/VRPL

Bhuwalka Casting and Forgings Pvt. Limited, Kolar

5,65,800.00

Completed

  1.  

Characterization and studies on reclaimed waste foundry sand as aggregates of building projects

Bhuwalka Casting and Forgings Pvt. Limited, Kolar

6,14,100.00

Completed

  1.  

Regenerative power from Bruderer Press

Duration: 1 Year;

Jan 1 to Dec 31, 2017

TE Connectivity India Pvt. Ltd., No.22B, TE Part, Doddenakundi 2nd Phase,

Industrial Area, Whitefield Road, Bangalore -48

8,50,000.00

Completed

  1.  

Micro Hydro turbine power generation

Duration: 1 Year;

Jan 1 to Dec 31, 2017

TE Connectivity India Pvt. Ltd., No.22B, TE Part, Doddenakundi 2nd Phase,

Industrial Area, Whitefield Road, Bangalore -48

 

8,00,000.00

Completed

  1.  

Power generation through Tribo Electric Nano Generators

Duration: 1 Year;

Jan 1 to Dec 31, 2017

TE Connectivity India Pvt. Ltd., No.22B, TE Part, Doddenakundi 2nd Phase,

Industrial Area, Whitefield Road, Bangalore -48

 

10,00,000.00

Completed

  1.  

Reliability Testing of Raspberry Pi Controller

 

Duration: 4 Year;

November 17 to February 2018

TE Connectivity India Pvt. Ltd

Shirwal, Pune, Maharashtra

3,00,000.00

Completed

11

Design of an Automated System to Pick and Place Gift Toys from Bowl to the Conveyor

Duration: 15 Weeks

Samson Automation Technologies Panchakula, Haryana

12,00,000.00

Completed

12

Design and Development of Collaborative Robot

Duration: 1 Year;

July 15 to June 30, 2019

TE Connectivity India Pvt. Ltd., No.22B, TE Part, Doddenakundi 2nd Phase,

Industrial Area, Whitefield Road, Bangalore -48

 

12,00,000.00

Completed

13

Power generation through Tribo Electric Nano Generators

Duration: 1 Year;

Aug 2018 to July 31, 2019

(Extension of Project)

TE Connectivity India Pvt. Ltd., No.22B, TE Part, Doddenakundi 2nd Phase,

Industrial Area, Whitefield Road, Bangalore -48

 

3,00,000.00

Completed

14

Deep Learning based Character Recognition (OCR) Vision System

Duration-2 months

DeepHive Technology Services(P) Limited, Bikasipura, Bangalore

3,18,600.00

Completed

15

Data logging system for FTTA (Fiber To The Antenna) Cable assembly

TE Connectivity India Pvt.Ltd.,

TE Park Local Manufacturing Unit,

22B Doddenakundi, 2nd Phase,

560048, Bangalore, India

3,68,160.00

Ongoing

List of National Conference publications:

  1. ”Dynamic behavior of sub frame of dump truck chassis – A Review” in the 5th National conference on “Topical Transcend in Mechanical Technology” TTMT-17, organized by Department of Mechanical Engineering, SJBIT, Bangalore on 10th May 2017.

  2. “Fatigue performance of cold expanded holes in al7050 aluminum alloy” in the International Conference on Advanced Materials and Composites (ICAMC-2007) to be held in Thiruvananthapuram, Kerala, India, October 24-26, 2007.

  3. “Finite Element Analysis of Pre-Stressed holes for Optimum Fatigue performance for Automotive Applications” in the National Conference on Advances in Mechanical Engineering, organized by Department of Mechanical Engineering, Kumara guru College of Technology, Coimbatore, Tamilnadu, India, March 22-24, 2007.

  4. “Optimization of C/D ratio of Adjacent Pre-stressed holes using Finite Element Analysis” in the National Conference on Advances in Mechanical Engineering, organized by Department of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore, Tamilnadu, India, March 22-24, 2007.

  5. “Micro structure studies of pre-stressed holes” in National Conference on Failure Analysis (NCFA-2006), organized by Defense Metallurgical Research Laboratory (DMRL), Hyderabad, India, December 22-24, 2006.

  6. “Analysis of cold expanded hole under tension for improved Fatigue life” in optest-2006 – National conference on optimization techniques in Engineering Sciences &Technologies held at Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, Tamilnadu, India, April 11-12, 2006.

List of International Journals publications:

  1. Ramesh S, S Denis Ashok, Shanmukha Nagaraj, “Modelling and Simulation of Electro-Hydraulic Circuit Used in Hydraulic Power Pack of A CNC Machine Tool” International Journal of Recent Technology and Engineering (IJRTE), Published By Blue Eyes Intelligence Engineering & Sciences, ISSN: 2277-3878, Vol. 8, Issue-1, May 2019, pp 2489-2493 (Scopus Indexed).

  2. “Design of an energy efficient hydraulic regenerative circuit”, Ramesh S, Denis Ashok, Shanmukha Nagaraj, Materials Science Engineering, 2018, pp120-129.

  3. “Energy conservation strategy in hydraulic power packs using variable frequency drive”, Ramesh S, Denis Ashok, Shanmukha Nagaraj, Materials Science Engineering, 2018, pp1-10.

  4. “Actively Tuned Vibration Absorber using Smart Adaptive Composites”, Basavaraj Noolvi, Dr. S raja, Dr. Shanmukha Nagaraj, Elsevier, ScienceDirect, Materials today Proceedings, 4 2017, pp 3506-3512.

  5. “An energy conservation strategy using variable frequency drive for a hydraulic clamping system in a CNC Machine”, Ramesh S, S Denis Ashok, Shanmukha Nagaraj, Elsevier, ScienceDirect, Materials today Proceedings, 4 2017, pp 3706-3712.

  6. “Harmonic Response Analysis of Gearbox”, Rishav Ranjan, Sindhu Srinath, Shanmukha Nagaraj, International Journal of Vehicles structures & Systems, 3(4), 234-240, ISSN: 0975-3060, 2016, pp234-242.

  7. “Single motor mechanical power split transmission for a hybrid car”, Rishav Ranjan, Sindhu Srinath, Anshul Dhakar, Bhadri Rajasai, Shanmukha Nagaraj, International Journal of Vehicles structures & Systems, 2016, pp234-242.

  8. “Inhibition Effects of a DMPO Derivative on the Corrosion of Zinc-Aluminium alloy in 0.1N Hydrochloric Acid solution by OCP method at different temperatures” Kari Ramakrishna, Shanmukha Nagaraj, International Journal of Mechanical Engineering and Research, Vol 02, Issue 1, 2015, pp18-24.

  9. “Optimization of Energy efficient systems in Machine Tool Technology”, Ramesh S, Shanmukha Nagaraj, Denis Ashok, Pranav Gabhane, STM Journals, Trends in Machine Design, Vol 02, Issue 2, 2015, pp1-8.

  10. “Position Characterization of Electro Pneumatic Closed Loop Control Valve”, Nataraj G.S, Shanmukha Nagaraj, Keshav M, Prakash K. R., International Journal of Research in Engineering and Technology (IJRET), Vol 02, Dec 2013, pp 616-619.

  11. “Automated sequential controlling of modular workstations”, Shanmukha Nagaraj and Ramesh S, International Journal of Research in Engineering & Technology (IJRET), Vol 1, Issue 2, July 2013, pp111-116.

  12. "Effect of ECAP on Al 6061 – FEA Approach", Shanmukha Nagaraj, V Mamtha and M S Vinod, Journal of Materials Science Forum, Vols. 638-642, 2010. pp443-448.

  13. "Dispersion of Nano-Materials into Polymeric System for Enhanced Properties", S C Sharma, H N Narasimha Murthy and N. Shanmukha, Journal of  Materials Science Forum, Vols. 638-642, pp. 1778-1783, 2010.

  14. "Optimum fatigue performance of pre-stressed fastener holes", N Shanmukha, M.S.Vinod, C.S.Chandrashekara Murthy, Journal of  structural engineering, Volume 37, No.37-24, pp. 197-202, 2010.

  15. “Isotropic and Kinematic Hardening for Cold Expanded Al7050 and Mild Steel by Finite Element Analysis”, N.Shanmukha, Vinod Srinivasa, Raghavendra Shenoy, C.S. Chandrashekara Murthy,  World Journal of Engineering, Vol.7, Supp. 2, pp. 348, 2010.

  16. “Microstructure Analysis of Cold Worked Holes”, N. Shanmukha, M Krishna. Trans Tech Publications, Material Science Forum, vols. 539-543 (2007) pp.2222-2227.

List of International Conference publications:

  1. “Synthesizing and Fabrication of Al-PDMS based Triboelectric Nano Generator” , Shanmukha Nagaraj, presented and published in International Conference on applied physics and Engineering (ICMAE 2018), organized by IIT, Indore, held on June 3-4, 2018.
  2. “Harmonic Response Analysis of Gearbox”, Rishav Ranjan, Sindhu Srinath, Shanmukha Nagaraj, presented in 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE2016), held at Kuala Lumpur, Malaysia, from November 23rd-24th , 2016.

  3. “Single Motor Mechanical Power Split Transmission for a hybrid car”, Rishav Ranjan, Sindhu Srinath, Anshul Dhakar, Bhadri Rajasai, Shanmukha Nagaraj, presented in 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE2016), held at Kuala Lumpur, Malaysia, from November 23rd-24th , 2016.

  4. “Effect of ECAP on Al 6061 – FEA Approach” at International Conference on Processing & Manufacturing of Advanced Materials, THERMEC’2009 held in Berlin, Germany from August 25-29, 2009.

  5. “Integral formulation of the problem of current distribution in compulsator wires of electromagnetic launchers and railguns” at 14th International symposium on Electromagnetic Launch Technology held in Victoria, British Columbia, CANADA from June 10-13, 2008.

  6. “Fatigue performance of cold expanded holes in Al7050 aluminum alloys” at Sixteenth International Conference on Processing & Fabrication of Advanced Materials [PFAM-XVI] held in Singapore from 17-19 December 2007.

  7. “Optimization of c/d ratio of adjacent pre stressed fastener holes in HCF using finite element analysis” accepted for presentation in the Fourth International Conference on Very High Cycle Fatigue [VHCF-4], university of Michigan, Ann Arbor, Michigan, USA, August 19-22, 2007.

  8. “Photo Elastic stress measurement on Pre-stressed fastener holes for improved high-cycle fatigue performance” accepted for presentation in the Fourth International Conference on Very High Cycle Fatigue [VHCF-4], university of Michigan, Ann Arbor, Michigan, USA, August 19-22, 2007.

  9. “Finite Element Analysis of Pre-stressed fastener holes for Optimum Fatigue Performance for Automotive Applications” International Conference on Modeling & Optimization of Structures, Processes & Systems, ICMOSPS’07, DURBAN, SOUTH AFRICA, 22-24 - January, 2007.

  10. “Optimization of C/D ratio of adjacent pre-stressed holes using Finite Element Analysis” at International Conference on Modeling & Optimization of Structures, Processes & Systems, ICMOSPS’07, DURBAN, SOUTH AFRICA, 22-24 - January, 2007.

  11. “Stress analysis and Evaluation of fatigue properties using cold hole expansion process” in fatigue 2006 - 9th International Fatigue congress held at Omni hotel, cnn center, Atlanta, usa, 14th to 19th May 2006

  12. “Evaluation of tensile properties of cold expanded hole for improved fatigue life” in fatigue 2006 - 9th international fatigue congress held at omni hotel, cnn Center, Atlanta, usa, 14th to 19th may 2006.

  13. “Microstructure analysis of cold worked holes” in thermec’2006, International Conference on “processing & manufacturing of advanced materials” held at Vancouver, Canada 04-08 July 2006.

  14. “Finite element analysis of pre-stressed fastener holes for enhanced fatigue performance for automotive applications” accepted for presentation in the International Conference icamp-4, Advanced materials & processing conference, Department of materials and process Engineering, university of Waikato, Hamilton, New-Zealand to be held December 10-13, 2006.

  15. “Cold expansion studies – by finite element method” at 12th annual international conference on composites/nano engineering [icce-12] at Tenerife, Canary Islands, Spain, August 1st to 6th August 2005.

Books Published:
Design of Machine Elements-1 Subhas Publications, Bangalore 2009.

Conferences / Seminars / Workshops / FDPs attended:

  1. One day Workshop on “Implementing the Industrial IoT” organized by National Instruments on 21 Feb 2018.

  2. Fifth International Conference on Transformations in Engineering Education (ICTIEE) 2018 organised by Thiagarajar College of Engineering, Madurai in association with Indo-Universal Collaboration for Engineering Education (IUCEE) during 8th and 9th January 2018.

  3. Three days International Conference on Enabling “Make in India Challenges and opportunities for Engineering Education” ICEMII 2016, organized by KLE Technological University, Hubballi, India at B.V.Bhoomaraddi College of Engineering & Technology, Hubballi from January 6-8, 2016.

  4. Five day workshop on “Faculty Pedagogical Development Programme” organized by R.V. College of Engineering, Bangalore-59 under TEQUIP-II initiative, conducted by International Academy for Competency Enhancement, Bangalore at Atria Hotel, Bangalore from 27th April 2015 to 1st May 2015.

  5. Two day workshop on “Strategic Leadership for Excellence” organized by R.V. College of Engineering, Bangalore-59 under TEQUIP-II initiative, conducted by International Academy for Competency Enhancement, Bangalore – 90 at Atria Hotel, Bangalore from October 25-26, 2013.

  6. Two weeks AICTE sponsored FDP Programme on “Smart Materials, Structures and Systems” organized by the department of Mechanical Engineering, Government Engineering College, Kushalnagar – 571234, from September 16-28, 2013.

  7. Two day National Conference on Sustainable “Institute Industry Partnership – Strategies & Action Plans” conducted by Society for Educational & Entrepreneurship Development at IIT Madras on April 3-4, 2013.

  8. Two day seminar on “Fatigue and Fracture of Engineering Materials and Structures” organized by M.S.Ramaiah School of Advanced Studies (Centre for training and lifelong learning) during January 28-29, 2011.

  9. Three day National Conference on “New Advances in Thermal, Design, Materials and Manufacturing Engineering – (NATDMME-09)” organized by Department of Mechanical Engineering under TEQUIP, Malnad College of Engineering, Hassan, Karnataka, India, during March 5-7, 2009.

  10. A Three day National workshop on “Advances in Manufacturing process (AMP-2008) sponsored by TEQUIP, organized by Department of Mechanical Engineering, National Institute of Technology, Warangal-560 004, during August 8-11, 2008.

  11. Attended as a delegate in the International Conference on Advanced Materials and Composites (ICAMC 2007) organized by National Institute for Interdisciplinary Science & Technology (NIIST) CSIR, Thiruvananthapuram during October 24-26, 2007.

  12. One day National Seminar on “ Nano Materials” organized by the Department of Physics, R.V.College of Engineering, Bangalore – 560 059, during October 9, 2006.

  13. Attended as a delegate in the International Conference on “Human Machine Interfaces ICHMI-2004”, organized by J.N.N. College of Engineering, Kuvempu University & MIT Touch Lab, USA, at J.N. Tata Auditorium, IISc, Bangalore, during December 20-23, 2004.

  14. Two day seminar on “Emerging Trends and Challenges in Technical Education” jointly organized by the Institution of Engineers (India) – Karnataka State Centre and Visvesvaraya Technological University – Belgaum in association with AICTE, New Delhi at Bangalore during November 9-10, 2004.

  15. Attended as a delegate in the International Conference on “Total Engineering, Analysis & Manufacturing Technologies” organized by Indian Institute of Science, Bangalore, during November 2-4, 2004.

  16. One day seminar on “Nanotechnologies for Space Applications (Nano-Tech 2004)” organized by R.V. College of Engineering & Indian Space Research Organization, Bangalore – 59, on June 26, 2004.

  17. One day national level seminar on “Trends & Needs of Green Manufacturing” sponsored by AICTE, New Delhi, organized by Adhiyamaan College of Engineering, Hosur – 635109, during June 7, 2004.

  18. One day workshop on “Tig-Mig welding of stainless steel & Aluminium Alloys” organized by Indian Institute of Welding, Bangalore Branch & BTL Institute of Technology & Management, Bangalore-562 158, during January 4, 2002.

  19. One day workshop on “Condition Based Maintenance of Machinery” organized by Department of Mechanical Engineering, R.V.College of Engineering, Bangalore – 560 059, during April 24, 2001.

  20. ISTE sponsored short term course on “Advanced Materials Science” organized by Siddaganga Institute of Technology, Tumkur – 572 103, during August 30 – September 12, 1999.

  21. Two day National Workshop on “Total Quality Control & Management” organized by Department of Mechanical & I.P Engineering, KLE S’s college of Engineering & Technology, Belgaum, during March 17-18, 1997.

Awards & Recognitions:

#

Particulars

Awarded by

Awarded for

  1.  

Best Teacher Award

Cognizant- RVCE ISTE Chapter

Best teacher for the academic year 2016-2017

  1.  

Michelin Challenge Bibendum Certificate

Michelin India Pvt. Ltd., during 2011

Participating in the 11th edition of Michelin Challenge Bibendum, Berlin 2011.

  1.  

Academic Excellence Award

RSST, RVCE during 2010

Paper presentation in the international conference at Berlin, Germany

  1.  

Academic Excellence Award

RSST, RVCE during 2009

Paper presentation in the international conference at British Columbia, CANADA

  1.  

Academic Excellence Award

ISTE, RVCE Chapter during September 9, 2008.

Academic excellence & research publication.

  1.  

Academic Excellence Award

RSST, RVCE during 2008

For award of PhD

  1.  

Academic Excellence Award

RSST, RVCE during 2007

Paper presentation in the international conference at Atlanta, USA & Vancouver, Canada

  1.  

Academic Excellence Award

RSST, RVCE during 2006

Paper presentation in the international conference at Tenerife, Spain

  1.  

Academic Excellence Award

ISTE, RVCE Chapter during September, 2005.

Academic excellence & Paper presentation in the International Conference.

 

 

                                                                                                                                                                                                     [Go Back]