You are here

Infrastructure / Facilities

                                                                                                                                                                                                                                  [Go Back]

Infrastructure/ Facilities:

The Department of Electronics & Instrumentation Engineering is spread over an area of 2706 square meters with  well equipped laboratories and six class rooms among which one is Multimedia Classroom. (EI-417), Two tutorial Halls for PG, and One seminar hall (shared).  The class rooms are having the facilities of LCD projectors for presenting the lectures and having sufficient space to accommodate more than 60 students.The department

Department Library:

Apart from the centralized library facility in the college, the department library is well stocked with books, magazines and journals of more than 1,940 Text & reference books, IEEE Journals, Magazines, Periodicals, CD's, Project Reports, Laboratory Manuals, etc for the benefit of the students. The important laboratories along with their special equipments are listed below

Department Laboratories

  • The campus is wifi enabled.
  • The EIE department has Seven well-equipped labs with  computer systems, softwares and hardware setup.
  • Internet Lab has been setup in the department, apart from the common browsing center facility available in the College, in order to enable the students to do quality projects.
   

Microcontrollers and Application LAB.

Microprocessor Kits, KEIL Software, Microcontroller Kits, Microcontroller Programmer, Hardware kits, Computers, Server, Programmable Power supply, Programmable Voltage Source built with an area of 80.00 Sq. M.

ROOM num: EI- 416

 

Digital Circuits Design Lab.

Digital IC Trainer Kits, IC Testers, Dual Power Supplies, built with an area of 96.00 Sq. M.

                        Room num:      EI-408

Linear IC's and Applications  &

Sensors and Instrumentation Lab

CRO, DSO, Power Supply, Signal generator, Instrumentation Bridges, Instrumentation Trainer kits, LCR Q Bridge, Inductive transducer, Photo diode setup, Photo transistor setup, Capacitive pickup setup, Diaphragm type pressure transducer built with an area 104.6 Sq. M.

                                 Room num:     EI- 425

Automatic Process Control and Modelling Techniques Laboratory

PLC, Level Control Trainer, Flow Control Trainer, Temperature Control Trainer, PID Controller Trainer, DC Postion Servo Mech Demo Unit, Inductive Transducer, Pressure Transducer Power Electronics Trainer kits, LCR Q Meters, M.,DSOs built with an area of 116.5 Sq.m

ROOM num: EI-423

Virtual Instrumentation & Data Aquisition LAB / DSP Lab

NI Data acquisition Cards, NI Elvis, myRIO,  myDAQ. Desktops & DSOs 100 MHz setup exists, with built up area of 83.06 Sq.m

ROOM num: EI-426

 R&D Lab

The lab is equipped with latest simulators for ECG,EEG, EOG, Phlethysmography, Galvanic resistance system, Pacemaker system, Electrical Safety analyser, Audiometer. In all the equipments are provided with simulators and real time data acquisition is possible. It is built with an area of 10 sqm.

Room num: EI-411

 

VLSI Design  / Digital System Design using VERILOG Lab

VLSI Lab is set up for Autonomous students with Cadence simulating tool and with Xilinx FPGA Trainer Kits with interface module, Modelsim Software, built with an area of 96 Sq. M.

DSP Kits (Texas), Code composer studio, Matlab. software with tool boxes.

ROOM num: EI-419

 

PG- Biomedical Signal Processing and Instrumentation Lab

The PG Lab is exclusive for M.Tech Students having Medical  Physiology and Instrumentation Lab, and Bio MEMS& NEMS Lab with softwares like MATLAB, COMSOL Multiphysics Software and BIOPAC kits with PPG Sensors.

ROOM num: EI-418

Department Library

The department library is of 70 sqm caters to the UG and PG student needs. It has more than 1800 books on various subjects including; Biomedical Instrumentation Electronic Devices and Circuits, Control Systems, Network Analysis, Signals and Systems, Digital Signal Processing, Digital Electronics, Process Control, Communication Systems, Virtual ,instrumentation, Microprocessors and Microcontrollers, VLSI & VHDL.

 

 All the Software & Hardware labs are having sufficient number of Computers, Power Supplies, UPS units, Function Generators, Signal Generators, Pulse Generators, Cathode Ray Oscilloscopes, 100MHz Digital storage oscilloscopes, Resistors, Capacitors, FETs, Transistors, Ammeters and Voltmeters etc.

                                                                                                                                                                                                     [Go Back]