You are here

Shruthi M N

Assistant Professor  
Educational Qualification

M.Tech., Degree, Visvesvaraya Technological University (VTU), Belgaum

(PhD) VTU Belagavi, Registered in 2015. 

Experience Teaching: 14 year
Area/s of Interest Industrial Management ,Computer Integrated Manufacturing.
Email ID shruthimn@rvce.edu.in  
 

Project Guided: UG : 04

National Journal Publication: 01

International Journal Publications: 03

National Conference Publications: 02

International Conference Publications: 09

 

List of Publications :

National Journal: 

      1. Mrs. M.N Shruthi, Dr. N S Narahari, Ms. Varna A "Machinability Studies of Chrome Steel in Turning Operation: An Experimental Investigation" at Journal of Industrial Safety Engineering ISSN: 2395- 674(online) Volume 3, Issue 2. Pg 10-18. 

International Journal Publication:

  1. Nandini B, MN Shruthi published a paper on “The effectiveness of employee welfare programmes and policies - an empirical study”at International journal for science and advance research in technology, Vol. 4, Issue 10.

  2. Dr. N S Narahari, Ms. Varna, Mrs. Shruthi M N "Development of a two stage prediction model for material removal rate during CNC turning operations – An investigation study " International Journal of Engineering Technology  Science an & research Vol 04, Issue 07, 37 - 45.

  3. M. Mahantesh M.Math, M.N Shruthi “Ergonomic Evaluation of Workstations in an IT Industry” published at aInternational Journal of Science Engineering and Advance Technology,IJSEAT, Vol 2, Issue 7, July – 2014, ISSN 2321-6905, Impact factor-1.25

National conference Publication:

  1. Ms. Shruthi M.N and Mrs. Chitra B.T: "Prevention of Child Labour in India" Poster presented at National conference on "Media and human Rights: the Global scenario" organized by Karnataka State Higher Educational Council, Bangalore and Centre for Communication Programmes, Tumkur University, during 23 November 2011.
  2. Ms. Shruthi M.N, Dr. A.V Suresh, and Mr. Sunil R. Yallemalle: "Comparative study of Anisotropic Mechanical properties of FDM ABS with Injection molded ABS", presented at Knowledge Utsav, jointly organized by Tumkur University and Jain Group of Institutions at SBMJCE, Bangalore. This paper was adjudged as the best paper in Advanced Product Quality Planning Category.

International conference Publication:

  1. M N Shruthi, N S Narahari, Bhaskar M G, Savita C Teli presented a paper on “Understanding material chemistry of mobile handset for recycling feasibility analysis” at First International Conference on Technologies for Smart Green Connected Society 2021 on 29th and 30th Nov 2021 (Got best paper award)

  2. Vivekanand S Gogi, Mahantesh M Math, Shruthi M N, Ravishankar V presented a paper on “Design & Optimization of A Platform For Workflows In Industries – A Case Study” at Eighth International Conference on Business Analytics and Intelligence (ICBAI-2021) at J.N. Tata Auditorium, Indian Institute of Science, during 20-22 December 2021

  3. MN Shruthi, N S Narahari presented a paper on "Feasibility for re-manufacturing of mobile handsets - A Case study" “5th International conference on Industrial Engineering (ICIE-2019)” at Sardar Vallabhbhai National Institute of Technology, Ichhanath Surat, India, from 12th -14th December 2019

  4. Dr. N S Narahari, Varna, Dr. Vikram N B, Shruthi M N presented a paper on “Investigative study on the development of a two stage machinability prediction model for Chrome Steel machining Operations using CNC turning” at 6th International Conference on Business Analytics and Intelligence (ICBAI - 2018), at Satish Dhawan Auditorium, Indian Institute of Science during 20th – 22nd, December 2018

  5. MN Shruthi, Dr N.S Narahari “Feasibility For Re-Manufacturing Of Mobile Handsets through Product Analysis And A Customer Perceptions Survey” International Conference On Recent Trends In Engineering & Sciences (ICRTES) at Daba Gardens, Visakhapatnam, Andra Pradesh, on 20th-21st Feb 2018.

  6. Dr. N S Narahari, Varna, Dr. Vikram N B, Shruthi M N presented a paper on “Investigative study on the development of a two stage machinability prediction model for Chrome Steel machining Operations using CNC turning” at 6th International Conference on Business Analytics and Intelligence (ICBAI - 2018), at Satish Dhawan Auditorium, Indian Institute of Science during 20th – 22nd, December 2018

  7. Prof. Nandini b, Prof. Shruthi M N "Effect of cutting fluid on surface roughness of hidumini-num and AISI 1040 steel" International Conference on value Engineering, at DSCE, Bengaluru on 5th March 2017. 

  8. Ms. Shruthi M N, Mr. M.N Vijaykumar & Dr. K N. Subramanya: "Productivity Studies of Ultra High Density (UHD) Stitching Process" presented at "Fourth International Joint Conference on Advances in Engineering and Technology - AET 2013" during 13th-14th December 2013 Gurgaon, Delhi-NCR, India.
  9. Ms. Shruthi M.N & Dr. K.V.S Rajeswara Rao: "Capacity Enhancement Studies in an Automotive Industry – A Case Study" presented at "International conference on Paradigms for Global Challenges and Opportunities: Vision – 2025" during 30th-31st October 2012 Bangalore.
  10. Ms. Shruthi M.N, Dr. A.V Suresh, Dr. H.N Narasimha Murthy: "Process study of D-SST Fused Deposition Modeling Machine By Experimental and FEA", presented at "International conference on Operational Excellence For Global Competitiveness" (ICOEGC - 2011) organized by Dept. of IEM, RVCE in association with ABCON Information Systems, Bangalore, during 3-5 February 2011.

Funded Projects:

  • Worked as a project coordinator for research study entitled, "A study of effectiveness of Women Welfare schemes implemented at IT/ITes sector – Karnataka" sanctioned by National Commission for Women Research & Studies Cell for Rs. 2,55,150/-.

Invited Talks:

  •  Mrs. Shruthi M N addressed students on "Career Guidance for Employees Children" at of M/s. LM Glass Fiber on 6th May 2016
  • Mrs.Shruthi M N delivered a talk on “CNC Programming” at  Five days “Online Orientation of Laboratory Courses for Technical Staff” organised by  Department of Industrial Engineering and Management during, RVCE on 10thJune 2021

  • MN Shruthi delivered a talk on “Orientation on Center of excellence in Robotics and Automation” as part of first year orientation program at IEM seminar hall on 14.12.2021.